Custom Fire Fighting Pipes,Seamless and Welded Steel Pipes Manufacturer Since 1991.
LOGO

FM Approved Fire Pump Test Flow Meter Wholesaler

Model NFPA 20
Certificate FM / LPCB Approved
Size 3”-8”
Connection Wafer/ Grooved
Accuracy ± 2%
Installation Horizontal / vertical
W. pressure 290 psi (2.0 MPa)
 

FM Fire Pump Test Flow Meter

Flowmeter for fire pump is mainly used to measure the volume flow of conductive liquid and slurry in closed pipes. Including acid, alkali, salt and other highly corrosive liquids.

Fire pump flowmeters may be used to determine the discharge of a fire pump. Water from the pump is temporarily directed through
the flowmeter, then to atmospheric drain or back to the water supply source.
It is important that the flowmeter not be connected directly back to the pump suction. This arrangement does not adequately test the
condition of the water supply.
These flowmeters are calibrated to measure the fire pump output directly in gal/min (dm3 /min). A control valve is provided in the
flowmeter line. This valve must be completely closed, except when the flowmeter is in use. Unless otherwise noted in the listing, these
systems have 175 psi (1205 kPa) rated working pressure.

Example Seamless Size

Note: Some of the main specifications are shown below, please contact us for more details.
Size
Pump capacity (gpm)
Test range (gpm)
Connection
Ref. NO.
Inch
DN
3”
80
200
100-400
Wafer FLG/ GRV
U3101
4”
100
250
150-500
Wafer FLG/ GRV
U3102
4”
100
300
150-600
Wafer FLG/ GRV
U3103
4”
100
450
250-900
Wafer FLG/ GRV
U3104
6”
150
500
250-1000
Wafer FLG/ GRV
U3105

 

One-stop service to facilitate your purchase

The Baolai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.

Processing Services:

For more information, please contact our service team.

Get a Free Quote

More than a manufacturer, we provide a one-stop solution for your business.

Metal Weight Calculator